Filter
Top Products
– Validate cluster
v
Change display group
v Save support archive
Display group object: Use this object, in the Enterprise view, to work with a
display group.
Possible subobject
v
(System)
v
(Management station)
Warning
and error conditions
v
(warning) is displayed if any system in the display group has any problem.
Actions
v Delete display group
v Rename display group
ServeRAID
controller object: Use this object, in the Enterprise view, to work with
ServeRAID controllers and related objects in the Physical and Logical device views,
or to display controller properties.
Possible subobject
v
(Arrays)
v
(Logical drives)
v
(Channel [number])
v
(Port [numbers])
Warning
and error conditions
v
(warning) is displayed for the following conditions:
– Any subobject of the controller has any warning or error conditions.
– The controller has a battery-backup cache problem.
v
(error) is displayed for the following conditions:
– The controller has failed.
– The controller has a bad configuration.
Actions
Note:
Not all actions are supported on all controllers.
v Configure RAID
v Restore to the factory-default settings
v Copy configuration from drives
v Delete all arrays
v Create logical drive in array [number]
v Scan for new or removed ready drives
v Enable or disable copy back mode
v Identify all physical drives
104 ServeRAID Manager Installation and User's Guide