Filter
Top Products
The ServeRAID Manager extension should be installed on the management server
before installing the console components of ServeRAID Manager.
Complete the following steps to install the ServeRAID Manager extension on a
Windows management console:
1. Copy the downloaded installation files to a temporary directory on the machine
on which you will be performing the installation.
2. Close IBM Director Console.
3. Click Start → Run.
4. In the Run dialog, type the following command in the Open field and press
Enter:
download\raid\console\windows\serveraid_5.10_console_windows.exe
download represents the location into which the ServeRAID Manager download
package was unzipped.
5. In the first panel of the ServeRAID Manager Console InstallShield Wizard, click
Next.
6. In the second panel of the ServeRAID Manager Console InstallShield Wizard,
complete the following steps:
a. Ensure that the hard disk drive icon
appears to the left of ServeRAID
Manager Console in the list box. If a different icon appears, click the icon
and select This feature, and all subfeatures, will be installed on local hard
drive from the menu.
b. Click Next.
7. In the third panel of the ServeRAID Manager Console InstallShield Wizard,
click Install. A new panel displays the installation progress.
8. When installation has completed, click Finish.
9. Restart IBM Director Console.
After installing the console components of the extension, you need to install the
ServeRAID Manager Agent components on your managed systems.
Installing the ServeRAID Manager extension on a Linux console
This topic describes the procedure for installing ServeRAID Manager on a Linux
management console.
The ServeRAID Manager extension should be installed on the management server
before installing the console components of ServeRAID Manager.
Note: ServeRAID Manager user-interface components for IBM Director Console are
automatically installed on the management server when the ServeRAID
Manager server components are installed. It is not necessary or possible to
separately install ServeRAID Manager console components on a
management server.
Complete the following steps to install ServeRAID Manager on a Linux console:
1. Copy the downloaded installation files to a temporary directory on the machine
on which you will be performing the installation.
2. Close IBM Director Console.
3. Change to the directory in which the installation package is located. Type the
following command and press Enter:
Chapter 2. ServeRAID Manager 15