Filter
Top Products
Installation scenario Command
Upgrading from a previous
version (32-bit agent)
rpm -Uvh --relocate /opt/ibm/director=/opt/IBM/
director RAIDLxAg-5.10-1.i386.rpm
Upgrading from a previous
version (64-bit agent for
Opteron or EM64T)
rpm -Uvh --relocate /opt/ibm/director=/opt/IBM/
director
RAIDLxAg-5.10-1.x86_64.rpm
The installation progress is displayed.
You must reboot the managed system before the ServeRAID Manager Agent will
operate.
Installing the ServeRAID Manager extension on a managed NetWare
system
This topic describes the procedure for installing the ServeRAID Manager extension
on a NetWare managed system.
v The ServeRAID Manager extension should be installed on the management
server and management console before installing the agent components of the
ServeRAID Manager extension on managed systems.
v IBM Director Agent should be installed on the managed system before installing
the ServeRAID Manager extension.
Note:
To install the ServeRAID Manager extension, you must log on to the
NetWare server from a Windows workstation running the NetWare Client
for Windows. The SYS volume must be mapped as a drive to the system
running Windows. Also, you must have administrator or supervisor access
on the NetWare server.
Complete the following steps on the Windows workstation running NetWare Client
for Windows to install the ServeRAID Manager extension on a NetWare managed
system:
1. Copy the downloaded installation files to a temporary directory on the
Windows workstation on which you will be performing the installation.
2. Click Start → Run.
3. In the Run dialog, type the following command in the Open field and press
Enter:
download\raid\agent\windows\serveraid_5.10_agent_netware.exe
download represents the location to which the ServeRAID Manager extension
download package was saved.
4. If prompted for the language, select a language from the dropdown list and
click OK.
5. In the first panel of the IBM ServeRAID Manager Agent 5.10 Setup Wizard,
click Next.
6. In the second panel of the IBM ServeRAID Manager Agent 5.10 Setup Wizard,
complete the following steps:
a. Select the mapped NetWare drive on which to install ServeRAID Manager
extension Agent.
b. Click Next.
7.
In the third panel of the ServeRAID Manager extension Agent InstallShield
Wizard, click Install.
18 ServeRAID Manager Installation and User's Guide