Filter
Top Products
Failed to connect to host name [ID] due to incompatible versions
[Local=id Remote=id].
Explanation:
The local and remote versions of the ServeRAID Manager are incompatible
versions.
Action:
Upgrade the older version of the ServeRAID Manager to the newer version.
ServeRAID Manager failed to start at port number [number].
Explanation:
The ServeRAID Manager was unable to use the specified port number. The port is
currently in use.
Action:
Change the port number for the system by doing the following:
1. Click Agent actions → Configure.
2. Click the General settings tab.
3. In the Agent base port number field, type a new value for the port number.
The default port number for local access is 34571. Note: When changing the
port number, consider the following:
v This change does not take effect until you restart the ServeRAID Manager.
v Any system that is accessing this system remotely must have the port
number changed to match the value you type. On the remote system, you
can change this value in the Add Remote System window.
v Any system that contains this system in its Notification list must change the
port number to the new port number. On the remote system, you can change
the port number in the Notification Manager by clicking Modify system .
Refused connection from [remote system ID].
Explanation:
Security is enabled on this system, and the ServeRAID Manager received a remote
log-in request containing an incorrect user ID or password.
Action:
The remote system requesting a log-in to this system must specify a valid user ID
and password. Be sure the remote system issuing the log-in request specifies a
valid user ID and password.
Chapter 5. Troubleshooting ServeRAID Manager 235