Filter
Top Products
Could not unblock logical drive [number]: controller [number]
Explanation:
The specified logical drive could not be unblocked because of one of the following:
v The rebuild operation was not completed successfully.
v A hardware error occurred.
Action:
Verify that the rebuild operation was completed successfully. If it did, then
complete the following steps:
1. Verify that the controller, cables, and physical drives are installed properly.
2. Verify that there is power to the physical drives.
3. Retry the command.
4. If the command still fails, restart the server and retry the command.
5.
If the problem persists, contact your service representative.
Could not create a hot-spare drive: controller [number], < drive
location> Could not create a standby hot-spare drive: controller
[number], < drive location>
Explanation:
The hot-spare drive or standby hot-spare drive could not be defined because a
hardware error occurred.
Action:
1. Verify that the controller, cables, and physical drives are installed properly.
2. Verify that there is power to the physical drives.
3. Retry the command.
4. If the command still fails, restart the server and retry the command.
Could not delete array: controller [number], array [letter]
Explanation:
The array could not be deleted because a hardware error occurred.
Action:
1. Verify that the controller, cables, and physical drives are installed properly.
2. Verify that there is power to the physical drives.
3. Retry the command.
4. If the command still fails, restart the server and retry the command.
5. If the problem persists, contact your service representative.
218 ServeRAID Manager Installation and User's Guide