Filter
Top Products
2. Click
>> (Add selected arrays) to add the arrays to the spanned array. You
can click
>> (Add all arrays) to move all arrays to the spanned arrays.
3. To create additional spanned arrays, click the New spanned array tab in the
right pane.
Then, repeat steps 1 and 2.
4. Click Next; the Create Logical Drives window opens.
To return to the Create Arrays window, click Back. To leave the Configuration
wizard, click Cancel.
More information
v Understanding RAID level-x0
v Understanding creating spanned arrays
Creating logical drives
Complete the following steps to create logical drives:
1. Click the appropriate Array tab.
2. Select a RAID level from the drop-down list.
v If you are configuring a spanned array, you can set the RAID level only for
the first logical drive you create.
v In addtion to the standard RAID levels (0, 1, 5, x0), you can also create a
simple volume: a single disk drive, non-redundant.
3.
If you do not want to use the maximum size for the logical drive, type the size
in the Data (MB) field.
Notes:
a. Some operating systems have size limitations for logical drives.
Before you save the configuration, verify that the size of the logical
drive is appropriate for your operating system. For more detailed
information, see your operating-system documentation.
b. A logical drive cannot exceed 2048 GB (2 terabytes); the minimum
size is 10MB.
Chapter 4. Managing ServeRAID devices 77