Filter
Top Products
Could not copy the configuration from the non-shared logical drives
(merge group [number]): controller [number]
Explanation:
A hardware error occurred.
Action:
1. Delete the arrays by using Restore to factory-default settings.
2. Set the controller name, the partner controller name, and the SCSI initiator IDs.
3. Retry the command.
If
the problem persists, contact your service representative.
Could not change the BIOS-compatibility mapping to [Extended or
Limited]: controller [number]
Explanation:
A hardware error occurred.
Action:
1. Verify that the controller, cables, and physical drives are installed properly.
2. Verify that there is power to the physical drives.
3. Retry the command.
4. If the command still fails, restart the server and retry the command.
5. If the problem persists, contact your service representative.
Could not change the write-cache mode: controller [number], channel
[number], SCSI ID [number]
Explanation:
A hardware error occurred.
Action:
1. Verify that the controller, cables, and physical drives are installed properly.
2. Verify that there is power to the physical drives.
3. Retry the command.
4. If the command still fails, restart the server and retry the command.
If
the problem persists, replace the specified drive.
Enclosure device is not responding: controller [number], channel
[number]
Explanation:
A hardware error occurred.
Chapter 5. Troubleshooting ServeRAID Manager 241