Filter
Top Products
Could not change the rebuild rate: controller [number], < device
location>
Explanation:
A hardware error occurred.
Action:
1. Verify that the controller, cables, and physical drives are installed properly.
2. Verify that there is power to the physical drives.
3. Retry the command.
4. If the command still fails, restart the server and retry the command.
5. If the problem persists, contact your service representative.
Could not change the stripe-unit size: controller [number], < device
location>
Explanation:
A hardware error occurred.
Action:
1. Verify that the controller, cables, and physical drives are installed properly.
2. Verify that there is power to the physical drives.
3. Retry the command.
4. If the command still fails, restart the server and retry the command.
Could not change the write-cache mode: controller [number], logical
drive [number]
Explanation:
A hardware error occurred.
Action:
1. Verify that the controller, cables, and physical drives are installed properly.
2. Verify that there is power to the physical drives.
3. Retry the command.
4. If the command still fails, restart the server and retry the command.
5. If the problem persists, contact your service representative.
Could not change the SCSI transfer speed: controller [number],
channel [number]
Explanation:
A hardware error occurred.
238 ServeRAID Manager Installation and User's Guide