Filter
Top Products
v SRP - Secure Remote Password
3.
If you enabled authentication (by choosing CHAP or SRP), click
; the
Global User Name and Password Management window opens. Then, add users
to the user list.
4. To enable Radius authentication for the CHAP authentication method, click
Radius authentication; then, enter the following:
v In the Primary server field, enter the host name or TCP/IP address of the
authentication service; then, in the Port field, enter the server’s startup port.
v In the Secondary server field, enter the host name or TCP/IP address of the
authentication service; then, in the Port field, enter the server’s startup port.
Note:
Radius authentication is supported by the CHAP authentication method
only.
5. To modify the default SLP Scope name, click Advanced settings; then, in the
SLP Scope Name field, type a unique scope name or choose an existing name
from the drop-down list.
6. Repeat steps 1 through 5 to enable authentication for additional logical drives.
To replicate the settings for all logical drives, click
.
7. When you are ready to continue, click Next. The Define Initiators window
opens.
To return to the Create Logical Drives window, click Back. To leave the
Configuration wizard, click Cancel.
More information
v Adding users to the user list
Defining initiator information
Use the Initiator Information window to define an alias, or ″friendly″ name, for
each initiator that can access the enclosure, including the initiator IQN (iSCSI
Qualified Name) or fibre channel port name. An initiator represents a machine on
the network that can access the enclosure.
The ServeRAID Manager displays previously defined initiators in a list. The alias is
shown on the left. Depending on the initiator type (iSCSI or fibre channel), the
IQN or port name is shown on the right. Initiator types are not mixed. You can
add a new initiator, modify an initiator, or delete an initiator.
To add an initiator:
1. Click
. Depending on the initiator type, the Add iSCSI Initiator window opens or the
Add Port Name window opens.
2. Follow the steps below to add an iSCSI initiator or add a fibre channel port
name.
3. When you are ready to continue, click Next. The Assign Logical Drives to
Initiators window opens.
To return to the previous Configuration Wizard window, click Back.
To leave the Configuration wizard, click Cancel.
Chapter 4. Managing ServeRAID devices 79