Filter
Top Products
Unable to connect to the remote system
Explanation:
The ServeRAID Manager could not communicate with the ServeRAID Manager
agent on the remote system.
Action:
1. Verify that the ServeRAID Manager agent or console is running on the remote
system.
2. Verify that the port number specified for the remote system in the Add Remote
System window matches the value on the remote system. You can verify the
port number on the remote system by going to the ServeRAID Manager
running on that system and doing the following:
a. Click Agent actions → Configure.
b. Click the General settings tab.
c. Verify the value for the port number. The default port numbers for remote
access are 34571-34574.
3.
Verify the following:
a. The remote system is on.
b. Both the local and remote systems are connected to the network.
c. TCP/IP networking support is configured on both the local and remote
systems.
d. The host name of the remote system is defined in the Domain Name Server
or a Hosts file, if you are trying to connect using a host name.
e. The network is functioning.
Array [letter] storage space still available.
Explanation:
You have configured an array that still contains free space.
Action:
Before you apply this configuration, you can do either of the following:
v Increase the size of the new logical drives.
v If there is enough free space, create more logical drives in this array by returning
to the Configure Logical Drive window in the Configuration wizard.
Physical drives in array [letter] contain unusable space
Explanation:
You have configured an array using physical drives of different sizes. If you
configure an array using physical drives of different sizes, you cannot use all the
physical drive space.
Action:
To create optimal array configurations, include only physical drives of the same
size in any one array.
228 ServeRAID Manager Installation and User's Guide