Filter
Top Products
3 - 22 Fill in the Screens
Issue 1 EliteMail VMS/EliteMail Limited
S
ECTION
9
P
ROGRAM
W
ORKSHEET
8:
P
UBLIC
F
AX
B
OX
To set up the fax detect feature, refer to Figure 3-11 Public Fax Box to fill in
the Public Fax Box fields. If you are not viewing this screen, press - .
Press or until Page 6 is displayed.
Figure 3-11 Public Fax Box
Public Fax Box
Fax ID:
1. Move the cursor to this field.
2. Enter the System ID of the Public Fax Box, and press .
The default System ID is $_FAXBOX.
Voice Name:
To change the voice name, establish a local connection and record
the Public Fax Box name again. The default recorded name is The
Public Fax Box. For local connection, refer to Program Worksheet 2.
1. After a local connection is established, highlight this field.
2. To record, press , then press . Say the name, and
press any key to stop recording.
3. Press to listen to the name to make sure it sounds the way
you want.
4. Repeat steps 2 and 3 until you are satisfied with the recording.