Filter
Top Products
3 - 14 Fill in the Screens
Issue 1 EliteMail VMS/EliteMail Limited
Call transfer type
This field, located directly below the Transfer? field, is not labeled. It
can be Release, Await-Ans, or Wait-ring. To change the setting,
position the cursor over the existing setting, and enter:
Rings
Enter the number of times the extension should ring before the caller
is transferred to the subscriber voice, and press .
This parameter does not apply if you selected Release call transfer.
Screening?
Press - , then press , and press to expand the screen.
1. If you want to use call screening in the Screening Options
field, enter SC for Screen-Confirm, and press .
2. Move the cursor to the Screening? field, enter Y, and press
.
You can turn on call screening only with Await Answer call transfer.
3. If you do not want to use call screening, set the Screening?
field to No.
4. Move the cursor to the Transfer Options field.
5. Enter A for Announce, and press .
Subscribers hears a beep before the voice mail system
connects an outside caller.
6. If you are using Release call transfer, leave the Screening
Options and Transfer Options fields blank.
Worksheet Choice Enter
Release
R, and
press
Await Answer
A, and
press
Wait for Ringback
W, and
press