Filter
Top Products
EliteMail VMS/EliteMail Limited Issue 1
Job Specifications Manual 3 - 37
An active code On the pop-up window has * in its checkbox.
After you open the Access Code Options window, it stays open as you
scroll through the Personal Directory to view subscriber pages.
Transfer?
When call transfer is turned on for a subscriber, you can set several
custom features that control how the voice mail system transfers
calls. The subscriber can turn call transfer on/off from any touchtone
telephone. When call transfer is on, the custom settings configured
on the Personal Directory page take effect. Even if call transfer is
turned off for a particular subscriber, you may want to set up custom
call transfer features. That way, when the subscriber turns call
transfer on, the custom features are available.
1. Highlight this field.
2. To turn call transfer on, enter Y, and press .
3. After the , enter X, and press if calls should be
transferred to the subscriber extension. Or enter a different
telephone extension number, and press .
4. To turn call transfer off, enter N, press , and skip the rest
of this section.
Call transfer type
The transfer type field, below the Transfer? field, is not labeled. The
type can be Release, Await-Ans, or Wait-ring. To change the setting,
position the cursor over the existing setting, and enter:
______ rings
In the rings field, enter the number of times the extension should ring
before the caller is transferred to the subscriber voice mailbox, and
press .
This does not apply if you select
Release
call transfer.
Worksheet Choice Enter
Release
R, and
press
Await Answer
A, and
press
Wait for Ringback
W, and
press