Filter
Top Products
3 - 18 Fill in the Screens
Issue 1 EliteMail VMS/EliteMail Limited
Max ID attempts:
Use this field to set the number of times a caller can misdial.
1. To use a value other than the default of 4, highlight this field.
2. Enter the new value, and press .
3. If a caller should be routed to another System ID for help after
misdialing, highlight the Bad ID Goto field. Enter the new
value, and press .
Disk full warning at ___ mins left
Use this field to set the number of minutes of available message
storage space remaining before the system asks subscribers to
delete unnecessary messages.
1. To change this setting, highlight this field.
2. Enter the new value, and press .
Error notices to:
Use this field to set who should receive a voice message if certain
system errors occur. The system is set by default to the System ID
for the Operator Box (System ID
0), that sends the messages to
everyone with public message access. If the System ID for the
Operator Box is different on your system, replace 0 with the correct
ID.
1. To send the messages to a subscriber, replace the Operator
Box System ID with a subscriber Personal ID.
2. To send the messages to more than one subscriber, separate
the subscriber Personal IDs with commas (
e.g
.,
8123,8456,8678
).
You can also send the message to everyone with public
message access and to one or more subscribers (
e.g.
,
0,8123,8456,8789
).
If you use the Operator Box System ID to send error notices to everyone
with public message access, remove the
P
access code for at least one
subscriber. For details, refer to Worksheet 12 .