Filter
Top Products
EliteMail VMS/EliteMail Limited Issue 1
Job Specifications Manual 3 - 27
Add subscribers by range:
1. Press to Add.
2. Press to select Range, and press .
Enter Range of Extension # IDs
Start: Stop:
3. Enter the starting number of the range, and press .
4. Enter the ending number of the range, and press .
If desired, enter any numbers or letters as a prefix to the Extension #
IDs you are adding.
Constant prefix:
5. Press .
6. Enter any numbers or letters as a suffix to the Extension # IDs
you are adding, and press .
Constant suffix:
The system displays the selected range and asks to confirm.
7. To accept the range, press .
8. Otherwise, press .
9. Follow these steps again to add new range of Extension # IDs.
After you confirm the range, the system displays a series of
status messages as it adds the Extension # IDs.
10. If an ID in the range conflicts with a System ID already in your
system, that particular ID is not added. Refer to this message:
ID ... conflicts with existing
<ID and name of mailbox> and was not added.
Please make a note of this
Do you want to continue with the
next Extension # ID (Y/N)?