Filter
Top Products
EliteMail VMS/EliteMail Limited Issue 1
Job Specifications Manual 3 - 15
Holding?
1. Set up call holding in the Holding? field, enter:
You cannot use call holding with Release call transfer.
2. Press to close the expanded window.
Message Notification
Lamp #
If you are using message waiting lamps, in the Lamp # field, enter
the telephone number the system should dial to turn a message
waiting lamp on or off for the subscriber, and press . Enter X
to indicate the subscriber extension number.
Activate Lamps ?
1. Enter Y for Yes or N for No, and press to indicate if the
voice mail system should activate message waiting lamps for
every subscriber.
2. If you select Y, also check the Message Lamp On and Off
codes at the top of Switch Setup Screen Page 2 to ensure that
they are the correct codes for your NEC telephone system.
These codes were configured automatically when you entered
the name of the NEC telephone system. (Refer to Program
Worksheet 1: Site Information.)
Worksheet
Choice
Enter
Yes
Y, and
press
Vox
V, and
press
No
N, and
press