Filter
Top Products
2 - 44 Fill in the Worksheets
Issue 1 EliteMail VMS/EliteMail Limited
Message Notification and Delivery
When a subscriber or guest has messages pending, the voice mail system
can light a message waiting lamp or a special display or set a distinctive
dial tone on the subscriber extension to notify the subscriber . This feature
is supported by the NEC telephone system.
Lamp #
Enter the number the voice mail system should dial to turn a
message waiting lamp on or off for the subscriber. In most cases,
use the subscriber extension number.
Activate message waiting lamps for new messages?
Indicate if the voice mail system should activate message waiting
lamps for the subscriber when new messages come in.
For telephone #1 - #4
For
each
telephone number you want the voice mail system to call to
deliver messages for the subscriber, enter the following:
• Phone #
Enter the telephone number you want the system to dial.
• Wait _____ minutes
Indicate time you want the voice mail system to wait after a new
message arrives before dialing (batch message delivery only).
• Delivery Schedule
Enter the time the voice mail system should start delivering
messages and stop delivering messages. Circle the days of the
week the voice mail system should follow this delivery
schedule.
Enter the number of times the voice mail system should ring
before hanging up, and how long it should wait before trying the
telephone number again.