Filter
Top Products
Chapter 2 NAS Head 2-87
What do the Status LED Indicators on front panel indicate?
LED Status indicators at the front panel signal current activities taking place in the
system..
TABLE 2-17 Status LED Indicators
Power LED A continuous green LED indicates the system is powered on.
No light indicates the system is off.
Built-in NIC 1 LED A green LED indicates network activity via the built in NIC
port 1.
Built-in NIC 2 LED A green LED indicates network activity via the built in NIC
port 2.
Hard Drive Status LED
❥ A random blinking green LED indicates hard drive
activities.
❥ A continuous amber light indicates a hard drive fault.
❥ No light indicates no activities or faults.
System Status LED
❥ A continuous green LED indicates the system is in normal
operation.
❥ A blinking green LED indicates the system is operating in
a degraded mode.
❥ A continuous amber LED indicates the system is in a
critical or nonrecoverable condition.
❥ A blinking amber LED indicates the system is in a non-
critical condition.
❥ No light indicates the system is halted assuming the
power LED is green.
Flashdisk Activity
❥ A random blinking green LED indicates flashdisk activity.
❥ A continuous amber LED indicates the system is in a
critical or nonrecoverable condition.
System ID LED
❥ A continuous blue LED indicates the ID button is
depressed. This light is intended to help identify this
chassis among several. It can also help to illuminate the
rear of the chassis for service.
❥ No light indicates the ID button is not depressed.