Filter
Top Products
3-44 Sun StorEdge 5310 NAS Troubleshooting Guide • December 2004
Drives, drive modules, command modules, or command modules that are part of a
volume group configuration should not be moved. If you need to move storage
array components, call technical support for detailed procedures. Technical support
may direct you to complete several storage array preparation tasks undertaking the
relocation. These tasks may include the following:
■ Creating, saving, and printing a storage array profile of all storage arrays that will
be affected by the relocation of drives, drive modules, command modules, or
command modules
■ Performing a complete backup of all the data on the drives you intend to move
■ Verifying that the volume group and associated volumes on the affected storage
array have an Optimal status
■ Determining the location and status of any global hot spares associated with the
affected storage array
3.3.5.2 Convert an Command Module to a Drive Module
Note – IMPORTANT For information on whether your command module can be
converted, contact technical support.
An command module containing one or more controllers can be converted into a
drive module containing two environmental services monitors (ESMs). The
conversion can be completed without losing the data on the drives.
3.3.6 Raid Storage Manager (RSM)
This section provides an introduction to the Enterprise Management Window and
the Array Management Window, and describes the basic software layout. This
section also provides an overview of the tools and functions that are performed from
each management window, outlines the menus and toolbar buttons available in each
management window, and describes the various views and tabs displayed in the
Array Management Window.
For additional conceptual information and detailed procedures for the options
described in this section, refer to Storage Management Concept, "Introducing the
Enterprise Management Window" in the Enterprise Management Window online
help, and Learn About Storage Management Software, "Using the Array
Management Window" in the Array Management Window online help.