Filter
Top Products
3-54 Sun StorEdge 5310 NAS Troubleshooting Guide • December 2004
Array Management Window Toolbar
The Array Management Window toolbar buttons are used to create new volumes or
volume groups, monitor performance, view events, recover from failures, and locate
a particular node. Each toolbar button is described in Table 3-8. See Figure 3-27 on
page 3-51 for an example of the Array Management Window toolbar.
Drive Contains options to perform the following storage management
operations on drives: locating a drive, assigning or unassigning a
hot spare, failing, reconstructing, reviving or initializing a drive, or
viewing drive properties. Note These menu options are only
available when a drive is selected.
Advanced Presents maintenance options which should only be used under the
guidance of technical support.
Help Provides options to display the contents of the Array Management
Window Help, view a reference of all Recovery Guru procedures,
and to view the software version and copyright information.
TABLE 3-8 Array Management Window Toolbar Buttons
Toolbar Button Description
Create new volumes
(and volume groups,
if applicable)
Permits you to create volume groups and volumes.
Note You must select either a Free Capacity Node or an
Unconfigured Capacity Node in the Logical View before this option
is available.
View diagnostic
event log
Starts the Event Log Viewer which displays a detailed list of events
that occur in a storage array.
TABLE 3-7 Array Management Window Menus (1 of 2)
Menu Description