Filter
Top Products
3-88 Sun StorEdge 5310 NAS Troubleshooting Guide • December 2004
You must have administrative permissions to install software on the computer where
the event monitor will reside. After the storage management software has been
installed, the icon shown in Figure 3-37 on page 3-88 will be present in the lower-left
corner of the Enterprise Management Window.
FIGURE 3-37 Event Monitor Example
2. Set up the alert destinations for the storage arrays you want to monitor from the
Enterprise Management Window. A check mark indicates where the alert is set
(storage management station, host, or storage array). When a critical problem
occurs on the storage array, the event monitor will send a notification to the
appropriate alert destinations that were specified.
3. Synchronize the Enterprise Management Window and the event monitor. After it
has been installed, the event monitor continues to monitor storage arrays and send
alerts as long as it continues to run. If you make a configuration change in the
Enterprise Management Window, such as adding or removing a storage array or
setting additional alert destinations, you should manually synchronize the
Enterprise Management Window and the event monitor.
Alert Notifications
Alert notification settings must be configured to receive e-mail or SNMP
notifications if a critical event occurs on a storage array. The notification displays a
summary of the critical event and details about the affected storage array, including: