Filter
Top Products
Chapter 7 FRU/CRU Replacement Procedures 7-5
7.6.1 Opening the Front Bezel
To access the system controls and peripherals when a front bezel is installed, grasp
the bezel at the finger hole on the left side and gently pull it towards you, unhinging
it at the right, until it unsnaps from the chassis. Replace the bezel using the reverse
process (see Figure 7-2).
FIGURE 7-2 Sun StorEdge 5310 NAS Bezel Replacement
The EU front bezel uses a key system to lock the bezel. To remove the front bezel:
1. Unlock both sides of the bezel.
2. Gently pull the bezel forward. The bottom section of the bezel is connected via
hinges.
1
1
2
1 Chassis Handle
2 Bezel Locating T
ab