Filter
Top Products
3-68 Sun StorEdge 5310 NAS Troubleshooting Guide • December 2004
■ Automatic - If you are not using SANshare Storage Partitioning, specify this
setting. The Automatic setting specifies that a logical unit number (LUN) be
automatically assigned to the volume using the next available LUN within the
default group. This setting grants volume access to host groups or hosts that have
no specific volume-to-LUN mappings (designated by the Default Group node in
the Topology View).
■ Map later with SANshare Storage Partitioning - If you are using SANshare
Storage Partitioning, specify this setting. The Map later setting specifies that a
LUN not be assigned to the volume during volume creation. This setting allows
definition of a specific volume-to-LUN mapping and creation of storage
partitions. After the volume creation process is finished, a confirmation dialog is
displayed. Use this dialog to restart the Wizard to create another volume.
3.3.6.13 Mappings View
The Mappings View is used to define the storage topology elements (host groups,
hosts, host ports, and so on), to define volume-to-LUN mappings, and to view
SANshare Storage
Partitioning and heterogeneous host information. The Mappings View has two
views, Topology View and Defined Mappings View, shown in Figure 3-29 on page 3-
68 and described in Table 3-10.
FIGURE 3-29 Mappings View Window