Filter
Top Products
DSL & IAD CLI Reference Guide
13
CHAPTER 1
How to Access and Use the CLI
This chapter introduces the command line interface (CLI).
1.1 Accessing the CLI
Use any of the following methods to access the CLI.
1.1.1 Console Port
You may use this method if your ZyXEL Device has a console port.
1 Connect your computer to the console port on the ZyXEL Device using the appropriate
cable.
2 Use terminal emulation software with the following settings:
3 Press [ENTER] to open the login screen.
1.1.2 Telnet
4 Open a Telnet session to the ZyXEL Device’s IP address. If this is your first login, use
the default values.
Make sure your computer IP address is in the same subnet, unless you are accessing the
ZyXEL Device through one or more routers. In the latter case, make sure remote
management of the ZyXEL Device is allowed via Telnet.
Table 3 Default Settings for the Console Port
SETTING DEFAULT VALUE
Terminal Emulation VT100
Baud Rate 9600 bps
Parity None
Number of Data Bits 8
Number of Stop Bits 1
Flow Control None
Table 4 Default Management IP Address
SETTING DEFAULT VALUE
IP Address 192.168.1.1
Subnet Mask 255.255.255.0