Filter
Top Products
Chapter 21 WAN Commands
DSL & IAD CLI Reference Guide
159
• Displays the WAN backup configuration.
ras> wan backup load
ras> wan backup 1checkip 192.168.1.100
ras> wan backup 2checkip 192.168.1.150
ras> wan backup 3checkip 192.168.1.175
ras> wan backup checkmech icmp
ras> wan backup icmp 10
ras> wan backup tolerance 5
ras> wan backup recovery 60
ras> wan backup dialbackup active 1
ras> wan backup dialbackup ATcommand answer A0
ras> wan backup dialbackup callctl dialtimeout 20
ras> wan backup dialbackup callctl retrycount 10
ras> wan backup dialbackup portspeed 1
ras> wan backup save
save ok.
ras> wan backup display
------Wan Backup Setup-----
Check Mechanis: ICMP
Check WAN IP Address1: 192.168.1.100
Check WAN IP Address2: 192.168.1.150
Check WAN IP Address3: 192.168.1.175
KeepAlive Fail Tolerance: 5
Recovery Interval(sec): 60
ICMP Timeout(sec): 10
------Traffic Redirect Setup-----
traffic Active:: No
Backup Gateway IP Address:: 0.0.0.0
Metric:: 15
-------Dial Backup Setup-------
dial Active: Yes
dial Port Speed:: 9600
Init:: at&fs0=0
AT Command Strings:
Dial:: atd
Drop:: ~~+++~~ath
Answer:: A0
Drop DTR When Hang Up:: No
AT Response Strings:
CLID:: NMBR =
Called Id::
Speed:: CONNECT
Call Control:
Dial Timeout(sec):: 20
Retry Count:: 10
Retry Interval(sec):: 10
Drop Timeout(sec):: 20
Call Back Delay(sec):: 15
ras>