Chapter 7 Bridge Commands
DSL & IAD CLI Reference Guide
47
active This shows whether the bridge is active or not. It is either on or off. More than one
bridge may be active at one time.
Ether Address This refers to the MAC address of the final destination of the bridge static route.
IP address This is the IP address of the gateway. See the bridge stat set command
description for an explanation of gateways.
Gateway node The index number of the remote node. The remote node is the end point of a
bridge, for example, your ISP. Use wan node commands to find a list of available
bridges.
Table 18 bridge stat display
LABEL DESCRIPTION