ZyXEL Communications n/a Modem User Manual


 
Chapter 20 VoIP Commands
DSL & IAD CLI Reference Guide
143
20.6.1 VoIP Common Settings Command Examples
This example shows the country codes supported by the ZyXEL Device and selects Poland as
the location of the ZyXEL Device.
20.7 VoIP Auto-Provisioning Commands
Use these commans to configure auto-provisioning on the ZyXEL Device.
ras> voice config common index 1
ras> voice config common countrycode 1 h
Please input 0 or 42 to select country!254:Default. 255: MRD
0:USA | 1:JAPAN | 2:TAIWAN | 3: AUSTRIA | 4:BELGIUM
5:BULGARIA | 6:CZECH | 7:DENMARK | 8: FINLAND | 9:FRANCE
10:HUNGARY | 11:ICELAND | 12:ITALY | 13: LUXEMBOURG
14:NETHERLAND | 15:NORWAY | 16:POLAND | 17: PORTUGAL
18:SLOVAKIA | 19: SPAIN | 20:SWEDEN | 21:SWITZERLAND
22:UK | 23:GERMANY | 24:GREECE | 25:Australia | 26:New Zealand
27:Hong Kong | 28:Singapore | 29:Morocco | 30:Ireland | 31:Malaysia
32:Russia | 33:Thailand | 34:Israel | 35:UAE | 36:China | 37:Ukraine
38:South Africa | 39:Korea | 40:Philippine | 41:India | 42:Turkey
254:Default | 255:Issue sys default countrycode
ras> voice config common countrycode 1 16
ras> voice config common save 1
Table 54 Auto-Provisioning Command Summary
COMMAND DESCRIPTION
voice config autopro index <index> Specifies the auto-provisioning entry for configuration.
voice config autopro active <index>
<0:off|1:on>
Enables or disables this auto-provisioning entry.
voice config autopro servaddr <index> <ip> Sets the auto-provisioning server IP address.
voice config autopro timeout <index>
<seconds>
Sets the auto-provisioning time out value. This is the
amount of time that the ZyXEL Device waits for a
response from the auto-provisioning.
voice config autopro retry <index>
<seconds>
Sets the auto-provisioning retry interval. This is the
interval at which the ZyXEL Device will try to resend
messages to the auto-provisioning server if it fails to get
an acknowledgement response.
voice config autopro protocol <index>
<0:TFTP|1:HTTP|2:HTTPS>
Sets the protocol for sending the auto-provisioning
configuration files.
voice config autopro method <index>
<0:Common|1:Bluewin|2:Pincode>
Sets the method for sending auto-provisioning
configuration files.
voice config autopro phonenumber <index>
<phonenumber>
Sets the phone number identfiying the auto-provisioning
request. This is only necessary if the auto-provisioning
server requires a phone number to authenticate an auto-
provisioning request.
voice config autopro pincode <index>
<pincode>
Sets the PIN code for this auto-provisioning request. This
is only necessary if the auto-provisioning server requires
a PIN code to authenticate an auto-provisioning request.