Filter
Top Products
Chapter 20 VoIP Commands
DSL & IAD CLI Reference Guide
136
20.3.1 VoIP SIP Account Command Examples
This example does the following:
• specifies not to ring phone 2 when receiving a call by SIP 1 account.
• specified to ring phone 1 when receiving an coming call by SIP 1 account.
voice config signal outboundkaintvl
<index> <seconds>
Sets how often (seconds) the ZyXEL Device sends SIP
notify messages to the SIP server to let the server know
that a session is ongoing.
voice config signal stunactive <index>
<0:off|1:on>
Enables or disables STUN.
voice config signal stunservaddr <index>
<ip>
Sets the STUN server IP Address.
voice config signal stunservport <index>
<port>
Sets the STUN server port number.
voice config signal ringbackactive <index>
<0:off|1:on>
Disables or enables early media.
voice config signal ringbacktone <index>
<tone>
Sets an early media tone.
voice config signal musiconholdactive
<index> <0:off|1:on>
Disables or enables music on hold.
voice config signal musiconholdtone
<index> <tone>
Sets the music on hold tone.
voice config signal callfwd <index> <1-2> Specifies the call forwarding table.
voice config signal mixermode <index>
<0:Local|1:Remote>
Sets the 3-way conference mixermode.
voice config signal transafterconf <index>
<0:off|1:on>
Enables or disables transferring of calls from
voice config signal rfc3263 <index>
<0:off|1:on>
Disables or enables support for RFC 3263 for this SIP
account.
RFC 3263 specifies how SIP proxy servers use DNS to
find remote (located in another domain) SIP proxy server
to complete SIP calls.
voice config signal featuresdisable
<index> <0|1>
Disables or enables call forwarding for this SIP account.
Enter 1 to disable call forwarding or enter 0 to enable call
forwarding.
voice config signal save <index> Saves the SIP configuration in the working buffer to non-
volatile memory.
The working buffer is a volatile memory space. The
settings in the working buffer are not applied to the
ZyXEL Device until you execute this command.
voice config signal display <index> Displays the saved values for the SIP account.
voice config signal dumpCfg Displays the configured values in the working buffer for
the specified configuration.
voice config signal free Clears the working buffer for the specified configuration.
Any unsaved changes are lost.
Table 50 SIP Account Command Summary
COMMAND DESCRIPTION