Filter
Top Products
Chapter 22 Wireless LAN Commands
DSL & IAD CLI Reference Guide
185
wlan resetcount <1> Removes wirelsss statistics.
wlan restart Resets the wireless driver on the ZyXEL Device.
wlan rtsThreshold <256~2346> Sets the RTS threshold value.
When IEEE802.11g is enabled, the threshold is
always 4096.
When IEEE802.11g is not enabled, the threshold
can be 0~2432.
wlan save Saves all wireless settings to the permanent
memory.
wlan scan Scans for a channel which is not used by another
device.
wlan setautochan <0|1> Disables or enables auto channel selection.
0: Disable
1: Enable
wlan setbeaconperiod <20~1024> Sets a time interval in milisecond to specify how
often the ZyXEL Device broadcasts the SSID.
wlan setchannel <1~14> Sets the wireless channel depending on your
region.
wlan setdisasssta <mac> Disconnects a specified wireless client.
wlan setfragthr <256~2346> Sets the maximum data fragment size that can be
sent.
wlan setled <0|1> Turns on or off the WLAN LED.
0: OFF
1: ON
wlan setnoforbssid <0|1> Allows or disallows traffic forwarding between
different BSSs.
0: Disable
1: Enable
wlan setradio <0|1> Disables or enables the radio.
0: Off
1: On
wlan setrtsthr <1~2347> Sets the RTS threshold.
wlan setsitesurvey <1> Issues a site survey command to the WLAN driver.
wlan settxburst <0|1> Disables or enables transmission burst.
0: Disable
1: Enable
wlan settxpower <1 ~ 100> Sets the output power of the ZyXEL Device.
wlan settxpream <0|1|2> Sets the preamble type.
0: Long Preamble
1: Short Preamble
2: Auto
Table 69 General Wireless Commands (continued)
COMMAND DESCRIPTION