Filter
Top Products
About This CLI Reference Guide
DSL & IAD CLI Reference Guide
3
About This CLI Reference Guide
Intended Audience
This manual is intended for people who want to configure the ZyXEL Device via the
Command Line Interface (CLI). You should have at least a basic knowledge of TCP/IP
networking concepts and topology.
This guide covers the following product lines:
• DSL modems and routers
• IAD (Integrated Access Devices) - the P-2600 series
• VoIP: ATA (Analog Terminal Adapters and Station Gateways) - the P-2300 series
The version number on the cover page refers to the latest firmware version supported by the
products mentioned above. This guide applies to version 3.40 and 3.70 at the time of writing.
" This guide is intended as a command reference for a series of products.
Therefore many commands in this guide may not be available in your product.
See your User’s Guide for a list of supported features and details about feature
implementation.
Please refer to www.zyxel.com or your product’s CD for product specific User Guides and
product certifications.
How To Use This Guide
•Read Chapter 1 on page 13 for an overview of various ways you can get to the CLI on
your ZyXEL Device.
•Read Chapter 2 on page 17 for an introduction to some of the more commonly used
commands.
" It is highly recommended that you read at least these two chapters.
• The other chapters in this guide are arranged according to the CLI structure. Each chapter
describes commands related to a feature.
" See your ZyXEL Device’s User Guide for feature background information.