Filter
Top Products
Chapter 20 VoIP Commands
DSL & IAD CLI Reference Guide
138
voice config fxs fax <index> <0|1> Sets how the ZyXEL Device handles fax messages.
0: The ZyXEL Device uses G.711 to send fax messages.
1: The ZyXEL Device sends fax messages as UDP or
TCP/IP packets through IP networks. This method is also
referred to as T.38 relay.
voice config fxs callwaitingtime <index>
<time>
Sets the call waiting time.
voice config fxs cidtype <index> <0:During
Ring |1: Prior Ring>
Sets whether the ZyXEL Device displays the caller ID
priror to or during ringing when calls come in.
voice config fxs cidfirsttastype <index>
<0|1|2|3>
Sets the first TAS (Terminal Alerting Signal) parameter.
TAS specifies the method to alert the receiver that data is
forthcoming. The possible methods are:
• 0: NULL
• 1: DT-AS (Dual Tone Alerting Signal)
• 2: RP-AS (Ringing Pulse Alrting Signal)
• 3: Line reversal followed by DT-AS
This command executes automatically when a
countrycode is selected. It adjusts the settings for caller
ID to work in different geographic locations.
voice config fxs cidsecondtastype <index>
<0:NULL|1:DT-AS|2:RP-AS>
Sets the second TAS parameter.
This command executes automatically when a
countrycode is selected. It adjusts the settings for caller
ID to work in different geographic locations.
voice config fxs cidpayload <index>
<0:FSK|1:DTMF>
Sets the DTMF payload type.
This command executes automatically when a
countrycode is selected. It adjusts the settings for caller
ID to work in different geographic locations.
voice config fxs firsttastoint <index>
<0~65535>
Sets the first TAS timeout interval.
This command executes automatically when a
countrycode is selected. It adjusts the settings for caller
ID to work in different geographic locations.
voice config fxs sectastoint <index>
<0~65535>
Sets the second TAS timeout interval.
This command executes automatically when a
countrycode is selected. It adjusts the settings for caller
ID to work in different geographic locations.
voice config fxs firstringtoint <index>
<0~65535>
Sets the CID ring timeout interval.
This command executes automatically when a
countrycode is selected. It adjusts the settings for caller
ID to work in different geographic locations.
voice config fxs cidringtimeout <index>
<0~65535 msec>
Sets call id ring timeout. This command generates extra
200 ms delay. For example, if you set the value to 0 ms,
the actual value is 200 ms and if you set the value to 200
ms, then the actual value is 400 ms.
This command executes automatically when a
countrycode is selected. It adjusts the settings for caller
ID to work in different geographic locations.
voice config fxs ciddtasacktimeout <index>
<100~500>
Sets the TAS acknowledgement time out value (in
miliseconds).
This command executes automatically when a
countrycode is selected. It adjusts the settings for caller
ID to work in different geographic locations.
Table 51 Analog Phone Command Summary
COMMAND DESCRIPTION