Chapter 2 Common Commands
DSL & IAD CLI Reference Guide
24
Use the following commands for system debugging. A console port speed of 115,200 bps is
necessary to view packet traces on the ZyXEL Device.
Use the ping command to have the ZyXEL Device ping an IP address as shown in the
following example.
2.4 UTM and myZyXEL.com
Use these commands to create an account at myZyXEL.com and view what services you have
activated.
" Ensure your ZyXEL Device is connected to the Internet before you use the
following commands.
ras> sys trcpacket sw on
ras> sys trcdisp brief
0 02:13:43.650 ENET1-R[0092] UDP 192.168.1.33:137->192.168.1.255:137
1 02:13:43.650 ENET1-R[0092] UDP 192.168.1.33:137->192.168.1.255:137
2 02:13:44.010 ENET1-T[0060] ARP Request 192.168.1.1->192.168.1.200
3 02:13:44.390 ENET1-R[0092] UDP 192.168.1.33:137->192.168.1.255:137
4 02:13:44.390 ENET1-R[0092] UDP 192.168.1.33:137->192.168.1.255:137
5 02:13:45.140 ENET1-R[0092] UDP 192.168.1.33:137->192.168.1.255:137
6 02:13:45.140 ENET1-R[0092] UDP 192.168.1.33:137->192.168.1.255:137
ras>
ras> sys trcdisp enif0 bothway
TIME:02:17:08.780 enet1-XMIT len:1192 call=0
0000: ff ff ff ff ff ff 00 18 f8 04 f5 67 88 a2 10 00
0010: ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00
0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0030: 00 00 00 00 00 00 00 00 00 00 00 00
ras>
ras> ip ping 172.16.17.12
Resolving 172.16.17.12... 172.16.17.12
sent rcvd rate rtt avg mdev max min
1 1 100 10 10 0 10 10
2 2 100 0 9 3 10 0
3 3 100 0 8 5 10 0
ras>