DSL & IAD CLI Reference Guide
99
CHAPTER 16
MyZyXEL.com Commands
Use these commands to configure user, product, or service registration settings on your
ZyXEL Device. Your ZyXEL Device needs to connect to the registration server (the default is
http://www.MyZyXEL.com).
" Ensure your ZyXEL Device is connected to the Internet and the registration
server before you use the following commands.
16.1 Command Summary
The following section lists the commands for this feature.
Table 36 sys myZyxelCom Commands
COMMAND DESCRIPTION
sys myZyxelCom checkUserName
<username>
Checks whether the specified user name exists or
not in the myZyXEL.com database.
sys myZyxelCom register <username>
<password> <email> <countrycode>
Sends the specified registration information to
myZyXEL.com including user name, password,
email, and country code.
<countrycode>: This is a number that represents
the country you are from. Refer to table Table 37 on
page 100.
sys myZyxelCom trialService
<service>
Activates the trial services to myZyXEL.com.
<service>:
1: Content Filtering (CF)
sys myZyxelCom serviceUpgrade
<licence key>
Registers a license key to myZyXEL.com.
sys myZyxelCom serviceRefresh Gets up-to-date service status from the
myZyXEL.com database.
sys myZyxelCom display Displays the ZyXEL Device’s registration
information.
sys myZyxelCom serviceDisplay Displays the service status (including the expiration
date if the service is already activated).