Filter
Top Products
Chapter 20 VoIP Commands
DSL & IAD CLI Reference Guide
142
voice config common ivrlanguage <index>
<0~2>
Specifies the language for IVR. The languages
supported on your ZyXEL Device differ by model. This
command allows you to specify one of the languages
supported.
voice config common pstnfallback <index>
<0:Disable PSTN Fallback|1:Enable PSTN
Fallback>
Enables or disables the PSTN fallback function. When
this function is enabled the ZyXEL Device uses the
PSTN line to complete calls if a SIP account is
unregistered.
voice config common sipfallback <index>
<0:Disable SIP Fallback|1:Enable SIP
Fallback>
Enables or disables the SIP fallback function. When this
function is enabled the ZyXEL Device uses a SIP line to
complete calls if the PSTN line is not receiving a signal.
voice config common dialmethod <index>
<0:European|1:USA>
Sets whether the ZyXEL Device uses the European
dialing method or dialing method based on the American
system.
voice config common forcedialtone
<index><0:Busytone when SIP/PSTN Not
Registered|1:Dialtone when SIP/PSTN Not
Registered>
Sets the ZyXEL Device to provide a dial tone even if
there are no SIP lines registered on the ZyXEL Device.
voice config common removepound <index>
<0:not removed|1:removed pound>
Enables removing the pound (#) key as part of the dialed
digits. If this function is not activated then the pound key
is sent along with the dialed digits when making a call.
voice config common countrycode <index>
<countrycode|h:for help>
Sets the country code for the ZyXEL Device. Enter h as
the country parameter to view the countries supported by
your ZyXEL Device.
voice config common webdisable
<index><0:1>
Enables or disables configuring the call forwarding
feature in the web configurator.
voice config common save <index> Saves the common settings entry in the working buffer to
non-volatile memory.
The working buffer is a volatile memory space. The
settings in the working buffer are not applied to the
ZyXEL Device until you execute this command.
voice config common display <index> Displays the saved values for the common settings entry.
Table 53 Common Settings Command Summary
COMMAND DESCRIPTION