Filter
Top Products
Displaying Stream Content
172
VG-Series Modero Touch Panels
Step 2: Configuring the MAX-CSE for communication
1.
Complete the procedures outlined within the Configuring the MAX Communication Parameters
section of the MAX-CSE Instruction Manual to establish an active connection to the source
MAX-CSE.
2. Confirm the MAX-CSE is properly configured to use the newly established Static IP Address by
launching your browser and entering the MAX’s new Static IP Address into the browser’s Address
field.
3. Press the Enter key on your keyboard to initiate the communication process and launch the initial
on-screen Enter Network Password security dialog.
4. Enter the words administrator and password (if using the default login profile) into the
corresponding User Name/Password fields. This is the factory default security login information.
5. Click OK to enter the information and proceed to the Administration page which provides both a
descriptive overview of the program stream and lists the currently used firmware.
6. Determine the data throughput available on the network being used by the source encoder. This
information determines which Encoder Profile and Transport Protocol will be used to encode the
outgoing media stream.
7. Access Stream Profiles page (FIG. 129) by clicking the Stream Profiles link from within the
Navigation frame. This page allows a user to both configure the properties of the outgoing media
stream and setup the properties associated with communicating the stream to an external IP-enabled
device capable of receiving and processing the data.
8. From the Profile field, click on the drop-down arrow and from the available list, choose the desired
encoder setting which conforms to the available data throughput on your network. Although the
default selection is Home Theater (Max), the user can choose from up to 6 pre-created entries and
one Custom entry which makes every field user-definable.
For the purpose of these procedures, we’ve been informed that our network can handle the full
6 Mbps data throughput, so we’ll select Home Theater (Max).
FIG. 129 Stream Profiles page
Encoding Presets (including Custom)
Video Encoding Parameters
Stream Destination
Communication/Connection
Audio Encoding Parameters
Parameters
(use even port values)