Filter
Top Products
Installation Procedures: 12" and 15" Panels
57
VG-Series Modero Touch Panels
11. Secure these four #8-32 screws to the rear plastic cover by using a grounded Phillips-head
screwdriver. This step secures the VESA mount to the rear of the panel.
Refer to your particular VESA mount manufacturer’s installation procedures for further surface
mounting procedures.
FIG. 36 MB-TP15 Mounting contact surface area
3.23[82MM]
.72[18MM]
4.52[115MM]
3.83[97MM]
When installing a VESA mount to the rear plastic cover, use only the AMX provided
#8-32 screws.
FIG. 37 Installation of grommet into the rear plastic enclosure
Rear plastic cover (rear view)
Rim of the strain relief grommet
should lie flush against enclosure
CLIP FACING UP
VESA mount connection location
(USE ONLY AMX PROVIDED #8-32 screws)