Filter
Top Products
Installation Procedures: 12" and 15" Panels
62
VG-Series Modero Touch Panels
8. Insert the four sets of drywall screws and expansion clips into the four oval notch locations along
the top/bottom edges of the main unit (FIG. 41).
9. Carefully insert the main unit (with expansion clips) into the cutout until the Mounting Tabs on the
NXD unit lie flush against the wall (FIG. 41).
10. Tighten the drywall clip sets (screws and clips) until the Mounting Tabs are securely fastened and
flush against the wall.
FIG. 41 NXD-1500VG 15-inch Wall Mount panel dimensions using expansion clips
FRONT BEZEL
*
CUTOUT
*
*
Notches are
NOT
SYMMETRICAL
Don’t disconnect the connectors from the touch panel. The unit must be installed with
the attached connectors before being inserted into the drywall.