AMX NXD/NXT-1500VG Computer Monitor User Manual


 
Touch Panel Accessories
31
VG-Series Modero Touch Panels
5. Repeat this process again only when installing an additional CAT5 Suppression Ferrite
(model specific).
NXA-RGB RGB/VGA Interface Card (FG2260)
The NXA-RGB (FIG. 12) is an RGB/VGA plug-in interface card that allows any of AMX’s VG-Series
Modero Touch Panels to accept either RGB or HDTV Component signals directly from an external
source when routed through an optional NXA-AVB/RGB Breakout Box. This card is field upgradeable
and works in-tandem with the RGB connector on the front of an NXA-AVB/RGB Breakout Box.
The NXA-RGB card is an optional accessory (already installed within Video/RGB panels) that can be
added to any VG-Series Video Modero panel as part of an upgrade kit. The NXA-RGB card is a daughter
card that plugs into the Modero’s main board. This card provides the ability to display computer graphics
(RGB) or component (YCrCb) video within a full screen or resizable on-screen window on the Modero
panel. The NXA-RGB card must be used with the NXA-AVB/RGB Breakout Box. This breakout box
allows the Modero to accept and display high-bandwidth and high-quality RGB as well as HDTV
Component video signals. This box then converts the RGB or component video so that it can be sent
across a UTP (unshielded twisted pair) cable to the from the rear RGB/Component DB-15 connector
(rear of the box), through the front RGB RJ-45 connector, and then to the panel via the RJ-45 connector
on the installed NXA-RGB card.
FIG. 11 Ferrite connector location on Audio/Video RJ-45 cable
1
3
2
6 inches
To Touch
4
Connector
3
- used for Power
Connector
4
- used for RGB (Blue)
Connector
1
- used for Audio/Video (Black)
Connector
2
- used for Ethernet (White)
Panel
Ferrite
Ferrite
It is recommended that any upgrade of internal components be done simultaneously
in order to reduce the risk of damage to internal components.
If a user will be upgrading an NXD panel with a wireless card and an NXA-RGB card
(NXA-RGBKIT), it is recommended that these both be done at the same time if
possible.
FIG. 12 NXA-RGB RGB/VGA Interface Card (installed within a VG-Series panel)