Filter
Top Products
LineTermination
Purpose:
To add the line termination commands.
Values:
Default Color
Purpose:
To specify the color mode to Color or Black. This setting is used when the color printing mode setting is not
specified for the print job that is sent to the multifunction printer.
Value:
PostScript
Use the PostScript menu to change printer settings that only affect jobs using the PostScript emulation
printer language.
PS Error Report
Purpose:
To specify whether the multifunction printer outputs error contents for a PostScript error. The change
becomes effective after the printer is turned off and then on again.
Enable
Prints in the draft mode.
Off*
The line termination command is not added.
CR=CR, LF=LF, FF=FF
Add-LF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
Add-CR
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
CR-XX
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Black*
Prints in the black and white mode.
Color
Prints in the color mode.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Page
26
of
61
Understanding Menus
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...