Filter
Top Products
Wireless Network
Use the Wireless Network menu to change print settings affecting jobs sent to the printer through a wireless
network.
Wireless/Status
Purpose:
To display the information on the wireless signal strength. Any change cannot be made on the operator panel
to improve the status of the wireless connection.
Values:
Wireless/Reset Wireless
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless
network settings are reset to their default values.
TCP/IP
Auto*
Used when auto-detecting the PostScript communication protocol.
Standard
Used when the communication protocol is in ASCII interface.
BCP
Used when the communication protocol is in binary format.
TBCP
Used when the communication protocol supports both ASCII and binary data to switch between
them according to the specified control code.
Binary
Used when no special processing is required for data.
NOTE: The Wireless Net menu is only displayed when an optional multi-protocol card is installed on
the printer and the optional wireless printer adapter is installed on the card.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Good
Indicates good signal strength.
Acceptable
Indicates marginal signal strength.
Low
Indicates insufficient signal strength.
No Reception
Indicates that no signal is received.
Page
32
of
61
Understanding Menus
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...