Filter
Top Products
NetWare
Purpose:
To configure detailed settings for IPX/SPX and NetWare.
Values:
WINS*
1
WINS Mode Select the check box to get the WINS server address automatically from the DHCP server.
WINS Primary Server Sets WINS server address in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between
0 and 254. Note that values 127 and 224-254 are not valid for the first three-digits.
WINS Secondary Server Sets a back up WINS server address in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a
value between 0 and 254. Note that values 127 and 224-254 are not valid for the first three-digits.
LPD Connection Time-Out Sets the connection timeout period from 1 to 1000 seconds.
IP Filter (IPv4) To set the IP Filter settings, click IP Filter. The IP Filter page is displayed.
Port9100 Port
Number
Sets the port number from 9000 to 9999.
Connection Time-Out Sets the connection timeout period between 1 and 1000 seconds.
IP Filter (IPv4) To set the IP Filter settings, click IP Filter. The IP Filter page is displayed.
IPP*
1
Printer URI Displays the printer URI.
Connection Time-Out Sets the connection timeout period from 1 to 1000 seconds.
Port Number Displays the port number for receiving requests from the client.
Maximum Sessions Displays the maximum number of connections received simultaneously by the client.
WSD Port Number Sets the port number from 8000 to 9999.
Receive Time-Out Sets the receive timeout period from 1 to 65535 seconds.
Notification Time-Out Sets the notification timeout period from 1 to 60 seconds.
Maximum Number of TTL Sets the maximum number of TTL from 1 to 10.
Maximum Number of Notification Sets the maximum number of notifications from 10 to 20.
HTTP Port Number Sets the port number to 80 or from 8000 to 9999.
Simultaneous Connections Displays the maximum number of connections received simultaneously by the client.
Connection Time-Out Sets the connection timeout period from 1 to 255 seconds.
FTP Password Sets whether to enable or disable the password. And also specifies the password value up to 7 characters.
Connection Time-Out Sets the connection timeout period from 1 to 1000 seconds.
IP Filter
(IPv4)*
2
Address Sets the address in the address field. Enter a numeric value between 0 and 255 in each field of
"aaa.bbb.ccc.ddd." However, 127 and 224-254 cannot be used to "aaa."
Address Mask Sets the Subnet Mask in the Mask field. Enter a numeric value between 0 and 255 in each field.
Active
Mode
Reject Rejects printing from specified network address.
Permit Permits printing from specified network address.
Disabled Disables the IP Filter feature for the specified IP address.
*
1
An optional multi-protocol card is required to display the item.
*
2
This item is only available for LPD or Port9100.
IPX/SPX
Settings
Frame
Type
Auto Specifies the active frame type automatically.
Ethernet II Selects Ethernet II frame type.
Ethernet 802.3 Selects IEEE802.3 frame type.
Ethernet 802.2 Selects IEEE802.2 frame type.
Ethernet SNAP Selects SNAP (Sub Network Access Protocol) frame type.
Current Frame Type Displays the current frame type.
Network Address Displays the IPX network address.
NetWare Device Name*1 Specifies the printer name up to 47 alphanumeric characters.
For PServer Mode, set the Print Server Name (Print Server Object Name). The original setting remains valid if no input
is made.
Active
Mode
Directory:
PServer Mode
Selects this option when using in Directory: PServer Mode.
Page
30
of
40
Dell Printer Configuration Web Tool
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...