Filter
Top Products
8. Enter the SSID used in your wireless router.
9. Enter the Security used in your wireless router.
10. If you are using WEP or WPA-PSK security in your wireless router, enter the Index, Protocol, and Password information.
11. Click Next when you are done.
12. You can change the Printer Name and driver setup according to your requirement. When you select the Fixed IP option button
for IP Address assignment, click Change... and enter the IP address and subnet mask on the screen.
13. Click Next when you are done.
NOTE: To set WPA2-PSK-AES as security, select WPA-PSK and AES.
NOTE: When you enter a fixed IP address, avoid the "169.254.xxx.xxx" address used by AutoIP.
Page
21
of
48
Installing Optional Modules
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...