Filter
Top Products
SMB
Purpose:
To configure detailed settings for SMB.
Values:
AppleTalk
Purpose:
To configure the detailed settings for AppleTalk.
Values:
Bindery:
PServer Mode
Selects this option when using in Bindery: PServer Mode.
Tree Name*1 Specifies the tree name up to 32 alphanumeric characters. Configure this item only when Directory: PServer Mode is
selected.
Context Name Specifies the context name of the Print Server Object up to 255 alphanumeric characters. Configure this item only when
Directory: PServer Mode or Directory: RPrinter Mode is selected.
File Server Name*1 Specifies the file server name up to 47 alphanumeric characters. Configure this item only when Bindery: PServer
Mode is selected.
Polling Interval Sets the time interval from when print data enters the print queue until printing starts. The setting range is from 1 to
1000 seconds. The original setting remains valid if no input is made. Configure this item only when Bindery: PServer
Mode or Directory: PServer Mode is selected.
NCP
Packet
Burst
On Uses NCP packet burst.
Off Does not use NCP packet burst.
Password Sets the print server password up to 32 alphanumeric characters. Configure this item only when Binary: PServer
Mode or Directory: PServer Mode is selected.
Confirm Password Enter the password again.
Status Information Displays the status of NetWare.
SLP Active Discovery Select the check box to enable Active Discovery.
*
1
The following are illegal characters: semicolon (;), colon (:), asterisk (*), question mark (?), period (.), comma (,), yen mark (¥), back slash (\), double quotation
("), comparison symbols (< >), brackets ([ ]), operation symbols (+, =, or ~), pipe (|), slash (/), and space ( ).
NOTE: The settings in the NetWare page will be valid only when NetWare or the multifunction printer is rebooted. Click the Restart printer to apply new
settings button to apply new settings.
NOTE: An optional multi-protocol card is required to display the NetWare page.
Host Name Specifies the host name up to 15 alphanumeric characters. The original setting will remain valid if no input is made.
Workgroup Specifies the workgroup name up to 15 alphanumeric characters. The original setting will remain valid if no input is made.
Administrator Name Specifies the administrator name up to 20 alphanumeric characters. The original setting will remain valid if no input is made. The
default name is admin.
Administrator Password Specifies the administrator password up to 14 alphanumeric characters. The original setting will remain valid if no input is made. The
default password is password.
Confirm Administrator
Password
Allows you to confirm the configured administrator password by re-entering the same password.
Maximum Sessions Displays the maximum sessions.
Unicode Support On Notifies the host name and workgroup name in Unicode characters.
Off Does not notify the host name and workgroup name in Unicode characters.
Auto Master Mode On Enables the Auto Master Mode.
Off Disables the Auto Master Mode.
Encrypt Password On Encrypts the password.
Off Does not encrypt the password.
Job Time-Out Sets the timeout period from 60 to 3600 seconds.
Connection Time-Out Sets the connection timeout period from 60 to 3600 seconds.
NOTE: The settings in the SMB page will be valid only when the multifunction printer is rebooted. Click the Restart printer to apply new settings button to
apply new settings.
NOTE: An optional multi-protocol card is required to display the SMB page.
Page
31
of
40
Dell Printer Configuration Web Tool
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...