Filter
Top Products
5. Press Start to begin copying.
Original Type
The Original Type setting is used to improve the image quality by selecting the document type for the current
copy job.
To select the image quality:
1. Load the document to be copied on the document feeder glass, and close the cover.
2. Press until >COPY appears, and then press .
3. Press until Original Type appears.
4. Press to select the desired settings, and then press
5. Press Start to begin copying.
Lighter/Darker
Adjust the contrast to make the copy lighter or darker than the original.
To adjust the contrast:
1. Load the document to be copied on the document feeder glass, and close the cover.
2. Press until >COPY appears, and then press .
3. Press until Lighter/Darker appears.
4. Press to select the desired settings, and then press
NOTE: You can set the value in a percent for Custom.
Text&Photo* Uses for documents with both text and photo/gray tones.
Photo Uses for documents with photo or gray tones.
Best Uses for documents with fine text of high resolution.
Text Uses for documents with text.
Normal* Works well with standard typed or printed documents.
Darker1 Works well with light print or faint pencil markings.
Darker2
Darker3
Lighter3 Works well with dark print.
Page
6
of
14
Copying
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...