Filter
Top Products
Values:
Scan to PC
Purpose:
To specify the client when scanning data.
Values:
IP Filter
Purpose:
To configure the detailed settings for the IP Filter used for LPD and Port9100.
Values:
When you make the settings for the filter, enter the IP address of the IP Filter in the Address field and the Subnet Mask in the Address Mask field. Enter a numeric
value between 0 and 255 in each field. "*" is appended to the current value.
Setup Procedure
You can set up to a maximum of five items and the first item takes priority. Enter the shortest address first before proceeding to the next longer address when setting
multiple filters.
The following section explains how the IP Filter operates.
1. IP Filter Procedure
a. Enabling Printing From a Specified User
The following describes the procedure to enable printing only from the "192.168.100.10" IP address.
Procedures:
i. Click the first column of Access List row 1.
ii. Enter "192.168.100.10" in the Address field and "255.255.255.255" in the Address Mask field.
SNMP
Agent
Community Name
(Read only)
*1
Specifies the community name to access (read only) the data up to 31 alphanumeric characters.
The original setting will remain valid if no input is made. Characters entered for community name in previous settings will not be
displayed on the screen. The default Read Community is public.
Community Name
(Read/Write)
*1
Specifies the community name to access (read and write) the data up to 31 alphanumeric characters.
The original setting will remain valid if no input is made. Characters entered for community name in previous settings will not be
displayed on the screen. The default Read/Write Community is private.
Community Name
(Trap)
*1
Specifies the community name used for trap up to 31 alphanumeric characters.
The original settings will remain valid if no input is made. Characters entered for Community Name (Trap) in previous settings will
not be displayed on the screen. The default Trap Community is " " (NULL).
Trap Notification 1-
4
Select the check boxes to notify trap occurrence. In this case, specify the IP address and IP socket in the following format:
·IPv4
Specify the IP address and IP socket in the nnn.nnn.nnn.nnn:mmmmm format. Each section of "nnn" is a variable value between 0
and 255. Note that values 127 and 224-254 are not valid for the first three-digits only. IP socket mmmmm is a variable value
between 0 and 65535.
·IPv6
Specify the IP address and IP socket in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format. Each section of "xxxx" is a
hexadecimal variable value between 0 and ffff. IP socket mmmmm is a variable value between 0 and 65535.
·IPX
Specify the IPX address in the nnnnnnnn.mmmmmmmmmmmm.llll format. IP network nnnnnnnn is a hexadecimal variable value
between 0 and ffffffff, IPX node mmmmmmmmmmmm is a hexadecimal value between 0 and ffffffffffff and IPX socket llll is a
hexadecimal variable value between 0 and ffff.
Authenticate Error
Trap
Select the check box to notify Authenticate Error Trap.
*
1
The default value of each items can be changed by using Dell Printer Configuration Web Tool.
*
2
An optional multi-protocol card is required to display the item.
Scan to PC FTP Client Scans data by using the FTP client.
SMB Client Scans data by using the SMB client.
Address Sets the address in the address field. Enter a numeric value between 0 and 255 in each field of "aaa.bbb.ccc.ddd." However, 127 and 224-254
cannot be used to "aaa."
Address Mask Sets the Subnet Mask in the mask field. Enter a numeric value between 0 and 255 in each field.
Active
Mode
Reject Rejects printing from specified network address.
Permit Permits printing from specified network address.
Disabled Disables the IP Filter feature for the specified IP address.
Page
33
of
40
Dell Printer Configuration Web Tool
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...