Filter
Top Products
016-799
Data Violation
Press
multifunction printer on the
printer driver does not conform
to the multifunction printer you
are using, this message appears.
· Press to clear the message, cancel the
current print job, and conduct the next print
job, if any.
· Ensure that the printer configuration on the
printer driver conforms to the multifunction
printer you are using.
Over Heat
042-700
Cooling down
Please Wait...
Since it is abnormally hot inside
the multifunction printer,
printing is paused.
Wait for a while with the multifunction printer
on until the error disappears.
Memory Full
017-970
FaxJob Failure
Press
The fax memory is full and
cannot continue processing the
current fax job.
· Press to clear the message.
· The fax memory is full and fax job is
terminated. Print the received images, or wait
for a while until sending images is completed.
Memory Full
033-788
Fax Job Failure
Press
The fax memory is full and
cannot continue processing the
current fax job.
· Press to clear the message.
· The fax memory is full. Remove the received
images, or wait for a while until sending
images is completed.
Accumulation Limit
Not Stored
For Last Sheet
Press
Exceeds the maximum sheets of
paper at a time when you send a
fax.
· Press to clear the message.
· The maximum sheets of paper at a time are
loaded.
· Load up to 50 sheets of paper at a time.
No Answer
035-701
Fax Job Failure
Press
No answer is received from the
remote machine.
(T1 timeout on sending data)
· Press to clear the message.
· No answer is received from the remote
machine. Check the status of the remote
machine.
Communication
035-702
Fax Job Failure
Press
The communication was shut by
the remote machine.
(Received DCN)
· Press to clear the message.
· The communication was shut by the remote
machine. Check the status of the remote
machine.
No Answer
035-718
Fax Job Failure
Press
No answer is received from the
remote machine.
(T1 timeout on receiving data)
· Press to clear the message.
· No answer is received from the remote
machine. Check the status of the remote
machine.
Communication
035-720
Fax Job Failure
Press
The remote machine cannot
receive data.
· Press to clear the message.
· The remote machine cannot receive data.
Check the features of the remote machine.
No Dial Tone
035-746
Fax Job Failure
Press
Cannot detect a dial tone before
dialing the number.
· Press to clear the message.
· A dial tone cannot be detected. Check the
communication line.
Busy
035-781
Fax Job Failure
Press
The busy tone was detected
after dialing the number.
· Press to clear the message.
· The busy tone was detected. Wait for a while
and redial the number.
Page
4
of
7
Understanding Multifunction Printer Messages
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...