4.
Open the
front cover by pushing the button (right side) and remove the jammed paper.
Then, confirm
that there are no scraps of paper remaining inside the multifunction printer.
5. Close the front cover.
6. Insert the tray back into the multifunction printer, and push until it stops.
NOTE: If the paper jam message is not cleared after closing the front cover, pull out the 250-sheet tray
from the multifunction printer and remove the jammed paper.
Page
15
of
16
Clearing Jams
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...