Filter
Top Products
Restoring the Network Configuration
You can return the network configuration to its default settings.
1. Press until >SETUP appears, and then press .
2. Press until >Admin Menu appears, and then press .
3. Press until >Wired Net or >Wireless Net appears, and then press
4. Press until >Initialize NVM appears, and then press .
5. Press to select Yes, and then press .
The network configuration is restored.
6. Power the multifunction printer off and back on or reset the network interface card.
Resetting the Network Interface Card
You can reset the network interface card when a network problems occurs.
1. Press until >SETUP appears, and then press .
2. Press until >Admin Menu appears, and then press .
3. Press until >Wired Net appears, and then press .
4. Press until >Initialize NVM appears, and then press .
5. Press to select Yes, and then press
Page
8
of
8
Networking
2/
29/
2012
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch
...