Filter
Top Products
MMB Web-UI (Web User Interface) Operations
FIGURE 1.46 [Partition Configuration] Window
For the series of SB and IOU which are not installed, the background color is displayed in the gray.
Select the set partition by using the left radio button, and select the button corresponding to set process from
[Add Unit], [Remove Unit] and [Home].
If SB/IOU link is clicked, [SB#x] window, [IOU#x] window are displayed respectively.
If the maintenance mode (Hot Partition Maintenance, Warm System Maintenance or Cold system
Maintenance) is set, only the user (Maintenance person, Administrator privilege) who sets the maintenance
mode can operate this mode. If the partition is selected other than the maintenance target, a message is
displayed and operation is disabled.
TABLE 1.68 Display Items and Set Items of [Add Schedule] Window
Items
Description
# It displays the number for identifying the partition.
Exists up to 0~3 Partition.
SB/IOU which does not belong to the partition is displayed as follows.
Reserved: Reserved SB
Free: Free SB/IOB
Partition Name Displays/sets the name attached to the partition.
The name can be entered up to 16 characters.
It is possible to use alphanumeric characters, single bytes spaces, # (Sharp), _
(Underline), - (Hyphen) in the Partition Name.
By default, there are no settings.
Power Status Displays the Power status of the partition
On
Standby
SB
Displays the partition to which the SB belongs.