Filter
Top Products
MMB Web-UI (Web User Interface) Operations
Items
Description
HTTPS Port#
Sets the port number used for HTTPS.
The default is 432.
Timeout
Sets the length of time before a time-out due to no input causes the termination of an
HTTP or HTTPS connection.
You can specify 0 or a value in a range of 60 to 9999.
0 means there is no time-out.
The default is 600 seconds.
Telnet
Telnet
Sets Enable or Disable for Telnet.
The default is Disable.
Telnet Port#
Sets the port number used for Telnet.
The default is 23.
Timeout
Sets the length of time before a time-out due to no input causes the termination of a
Telnet connection.
You can specify 0 or a value in a range of 60 to 9999.
0 means there is no time-out.
The default is 600 seconds.
SSH
SSH
Sets Enable or Disable for SSH.
The default is Disable.
SSH Port#
Sets the port number used for SSH.
The default is 22.
Timeout
Sets the length of time before the SSH connection is timed out.
You can specify 0 or a value in a range of 60 to 9999.
0 means there is no time-out.
The default is 600 seconds.
SNMP
SNMP Agent
Sets Enable or Disable for SNMP Agent.
The default is Disable.
Agent Port#
Sets the port number used for SNMP Agent.
The specifiable port numbers are 161 and integers from 1024 to 65535.
The default is 161.
SNMP Trap
Sets Enable or Disable for SNMP Trap.
The default is Disable.
Trap Port#
Sets the port number used for SNMP Trap.
The specifiable port numbers are 162 and integers from 1024 to 65535.
The default is 162.
Remarks
To set HTTPS to [Enable], a valid SSL certificate must be registered.
If you set HTTPS to [Enable] when no valid SSL certificate has been registered, an error message appears.
TABLE 1.99 Buttons in the [Network Protocols] window
Buttons
Description
Apply
Sets the specified information.
Cancel Restores the original information and does not set the specified information, such as port
numbers and the time-out time.
(1) Menu Operation
[Network Configuration] - [Network Protocols]
(2) Window Operations